Sensata Products
Brazil/Brasil   Simplified Chinese   Traditional Chinese   Europe   Japan   Malaysia   Korea
Search Sensata:
*
*
Klixon 7235 and 7236 Series
 
 
Aircraft Circuit Breakers
 
    ACB Catalog



Klixon
klixon@sensata.com
Phone: 1-508-236-3287
Fax: 1-508-236-1598
more »
Part numbers
Don’t risk ordering the wrong part. Contact us or a distributor.



About these pages
Sensata Technologies is in the process of updating our web pages. Please bear with us during this process. If you have questions or comments, we’d like to hear from you. Please see contact us.

Site Updated October 24th, 2014

* * * Sensata > Products > Klixon Brand > Circuit Breakers > Aircraft >

Klixon® 7235 and 7236 series
Overload sensing controls, 7½–400 amps



Features and Overview Performance Characteristics
Chart Spec Sheet PDFs
Ask a question » Contacts and distributors »




Features and Overview /\ Top

Current rating: 7.5–400 amps
High reliability: does not switch overload current
Adaptable for AC, DC, single–phase, or three–phase applications
Stops nuisance trips: thermal element unaffected by transient current surges
Can be mounted in a remote location
 
Uses minimum space: small circuit breaker for size of electrical load
Only faulted line circuits opened: coordination ratings insures that branch circuit breakers trip first under fault conditions
Typical use: Remote sensing systems
* * *
Klixon
7235
7236

Klixon 7235 and 7236 overload sensing controls are designed for the remote sensing of overloads in aircraft electrical systems or other applicable remote systems. They are for the protection of 28 VDC circuits or for 120 VAC single–phase or three–phase circuits operating at 60 to 1000 Hz.

For three–phase AC circuit protection, a 28 VDC control circuit is required.

One three–phase relay or three single–phase relays with their coils wired in series may be used in the control circuit. With either arrangement, all three phases will trip open simultaneously when an overload exists in any one phase.

Klixon overload sensing controls consist of a bi-metal thermal actuating disc in series with the load terminals and an auxiliary single–phase, double–throw switch fitted to the main base forming a compact vibration–proof construction. The aircraft relay is wired in series with the sensing control through the S2 terminal of the auxiliary switch.

When the control senses and overload, the Klixon disc operates the auxiliary switch, breaking circuit S1-S2 and making circuit S1-S3. This opens the relay, thus opening the load circuit.

Using With 3MC Breakers
If the 3MC circuit breaker is to be used in the circuit, a suitable resistance (R1) must be built into the sensing control in order to limit the current flow through the manual control when the auxiliary switch moves to the S3 position. In applications where the 3MC will not be used this resistance is not necessary. In such an instance, the circuit through the S3 terminal may be used to trigger a signal lamp or some other device. For example, in applications using a mechanically latched–in relay the circuit through S3 may be used to release the relay magnetically which, in turn, opens the load circuit. In this application the control circuit through S2 could be used in conjunction with a momentary contact switch to energize the pull–in coil of the relay.



Performance Characteristics /\ Top
Vibration
1.52mm (0.06") total excursion, 10–55 cps
Mechanical Shock
25G
Acceleration
10G
Explosion Proof
3 cycles at 100 amps
Resistance
Corrosion: 15 hours (QQ-M-151A)
Sand and dust: 4 hours
Short Circuit Rupture
Relay capacity: 5 cycles, 20 VDC, 40,000 ft alt.
Amp Rating
7–50 amps: 2,000 amp adjusted circuit
Over 50 amps: 4,000 amp adjusted circuit


Chart /\ Top
 
7235-1
7235-2
7236-1
7236-2
Rating (in amps)
7–125
7–125
150–400
150–400
(S1-S³) Resistance R¹
0.75 ohm
None
0.75 ohm
None
Continuous Current Capacity (S1-S³)
3 amps
10 amps
3 amps
10 amps
(S1-S³) Contact Rating
10 amps
10 amps
10 amps
10 amps


Spec Sheets For Our Most Popular Devices /\ Top
Specification sheets contain detailed drawings, amp ratings, characteristics, and more...
7235X
Device Type
Spec Sheet
7235
- - -
7235-001
- - -
7235-002
- - -
7236
- - -
For others, please contact us.
The World Depends on Sensors and Controls