ME Series Inverter/Charger

Distributors Stock

Power Factor Corrected (PFC) Charger – Our PFC charger is built into all of our inverter / chargers. It uses less energy from a generator than a standard charger - using 25-30% less AC current than standard chargers.
Choices – The ME Series comes in three power models and optional built-in branch rated AC output breakers, allowing you to choose the model that is right for you.
Versatile mounting – Mount the ME Series on a shelf, bulkhead, or even upside down.
Lightweight – The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.
Multiple ports – The ME Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.
Accessible design – The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter more accessible when it needs to be.
Convenient switches – The ME Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.
Expanded transfer relay – 60 Amp transfer service is available on all models, and can be wired in three ways, including single in / single out, single in / dual out, or dual in / dual out.
Buy with ease – The ME Series is backed by a three-year (36-month) limited warranty.

Inverter Charger Features and Capabilities Environmental Physical Industries

	ME2012	ME2512	ME3112
Input battery voltage range	9 - 16 VDC	9 - 16 VDC	9 - 16 VDC
Nominal AC output voltage	120 VAC ± 5%	120 VAC ± 5%	120 VAC ± 5%
Output frequency and accuracy	60 Hz ± 0.1 Hz	60 Hz ± 0.1 Hz	60 Hz ± 0.1 Hz
1 msec surge current (amps AC)	60	100	120
100 msec surge current (amps AC)	37	45	50
5 sec surge power (real watts)	3700	5000	6000
30 sec surge power (real watts)	3450	4500	4800
5 min surge power (real watts)	3100	3500	3950
30 min surge power (real watts)	2400	2900	3500
Continuous power output at 25° C	2000 VA	2500 VA	3100 VA
Maximum continuous input current	266 ADC	333 ADC	413 ADC
Inverter efficiency (peak)	95%	91%	90%
Transfer time	16 msecs	16 msecs	16 msecs
Search mode (typical)	5 watts	5 watts	5 watts
No load (120 VAC output, typical)	20 watts	23 watts	25 watts
Waveform	Modified Sine Wave	Modified Sine Wave	Modified Sine Wave

	ME2012	ME2512	ME3112
Continuous output at 25° C	100 ADC	120 ADC	160 ADC
Charger efficiency	85%	85%	85%
Power factor	> .95	> .95	> .95
Input current at rated output (AC amps)	15	18	22

	ME2012	ME2512	ME3112
Transfer relay capability	2 legs at 30 A for 120 V/30 A or 240 V/60 A service
Five stage charging capability	Bulk, Absorb, Float, Equalize (requires remote), and Battery Saver™
Battery temperature compensation	Yes, 15 ft Battery Temp Sensor standard
Internal cooling	0 to 120 cfm variable speed drive using dual 92mm brushless DC fans
Overcurrent protection	Yes, with two overlapping circuits
Overtemperature protection	Yes on transformer, MOSFETS, and battery
Corrosion protection	Yes, PCB’s conformal coated, powder coated chassis/top, and stainless steel fasteners
Dual AC branch rated output breakers	Optional on the ME2012 - AC breakers in 20 amp ratings
Listings	ETL Listed to UL/cUL 458, CSA C22.2 #107.1-01

	ME2012	ME2512	ME3112
Temperature (Operating/Non-operating)	-20° C to +60° C (-4° F to 140° F) to -40° C to +70° C (-40° F to 158° F)
Operating humidity	0 to 95% RH non-condensing

	ME2012	ME2512	ME3112
Dimensions (l x w x h)	13.75” x 12.65” x 8.0” (34.9 cm x 32.1 cm x 20.3 cm)
Mounting	Shelf or wall (vents not allowed to face downward unless ME-CB or MMP/MP is installed
Weight	37 lb (16.8 kg)	41 lb (18.6 kg)	46 lb (20.9 kg)
Shipping weight	46 lb (20.9 kg)	41 lb (18.6 kg)	56 lb (25.5 kg)
Max operating altitude	15,000’ (4570 m)