MM-AE Series Inverter/Charger

Distributors Stock

Versatile mounting – Mount the MM-AE Series on a shelf, wall, or even upside down.
Fan cooled – The MM-AE Series is fan cooled, enabling the unit to work well in confined spaces. If the inverter does exceed its temperature limits, it will automatically shut down and then restart when it cools down.
Low battery protection – If your battery voltage goes below the cutout setting, the MM-AE Series will automatically shut down, saving your batteries.
High battery protection – If your battery voltage reaches over the cut-out setting, the MM-AE Series will shut down.
Current overload protection – The MM-AE Series will automatically shut down if its output wattage is exceeded or it detects a short in the wiring, saving the unit from costly damage.
Convenient switches – The MM-AE Series comes with an on/off front-mounted switch and an easy-to-read LED indicator.
Circuit breaker protection – Every model comes with built in input and output circuit breakers for ease of installation.
Battery temp sensor – The standard battery temp sensor monitors temperatures from 0 - 50° C.

Inverter Charger Features and Capabilities Environmental Physical Industries

	MM612AE	MM1512AE	MM1524AE
Input battery voltage range	9 to 16 VDC	9 to 16 VDC	18 to 32 VDC
Nominal AC output voltage	120 VAC ± 5%	120 VAC ± 5%	120 VAC ± 5%
Output frequency and accuracy	60 Hz ± 0.1 Hz	60 Hz ± 0.1 Hz	60 Hz ± 0.1 Hz
1 msec surge current (amps AC)	27	42	45
100 msec surge current (amps AC)	11	23	24
5 sec surge power (real watts)	1100	2100	2650
30 sec surge power (real watts)	1000	1750	2500
5 min surge power (real watts)	950	1550	2350
30 min surge power (real watts)	675	1525	1900
Continuous power output at 25° C (with 1.0 PF)	600 VA	1500 VA	1500VA
Continuous current output	5 ACC	10 ACC	13 ACC
Maximum input battery current	80 ADC	200 ADC	100 ADC
Inverter efficiency (peak)	95%	95%	91%
Transfer time	16 msecs	16 msecs	16 msecs
Search mode (typical)	3 watts	6 watts	4 watts
No load (120 VAC output, typical)	10 watts	18 watts	9 watts
Waveform	Modified Sine Wave	Modified Sine Wave	Modified Sine Wave

	MM612AE	MM1512AE	MM1524AE
Continuous output at 25° C	30 ADC	70 ADC	35 ADC
Charger efficiency	85%	88%	88%
Power factor	> 0.95	> 0.95	> 0.95
Input current at rated output (AC amps)	4	9	9

	MM612AE	MM1512AE	MM1524AE
Transfer relay capability	20 AAC (input current for charging and pass through)
Battery temperature compensation	Yes, 15 ft Battery Temp Sensor standard
Internal cooling	0 to 59 cfm variable speed
Overcurrent protection	Yes, with two overlapping circuits
Overtemperature protection	Yes, on transformer and MOSFETS
On/Off with status indicator	Yes, front mounted and easily accessible
Low battery cutout	10 or 20 VDC, adjustable on most models with the ME-RC remote
AC output/AC input	Hardwire	Hardwire	Hardwire
Output circuit breaker/Input circuit breaker	7A / 8AAC	15A / 20AAC	15A / 20AAC
Listings	NA

	MM612AE	MM1512AE	MM1524AE
Temperature (Operating/Non-operating)	-20° C to +60° C (-4° F to 140° F) to -40° C to +70° C (-40° F to 158° F)
Operating humidity	0 to 95% RH non-condensing

	MM612AE	MM1512AE	MM1524AE
Dimensions (l x w x h)	16.6” x 8.4” x 4.7” (42 cm x 21 cm x 12 cm)
Mounting	Shelf (top or bottom up) or wall (vents up)
Weight	16 lb (7.3 kg)	22 lb (10 kg)	22 lb (10 kg)
Shipping weight	18 lb (8.2 kg)	24 lb (10.9 kg)	24 lb (10.9 kg)
Max operating altitude	ABS plastic top and cast aluminum bottom