The MS-PE Series Inverter/Charger from Sensata Technologies is a 230 VAC / 50 Hz, pure sine wave inverter designed specifically for the most demanding renewable energy applications. The MS-PE Series is powerful, easy-to-use, and best of all, cost effective. Parallel stacking: You can parallel up to four inverter/chargers for up to 17.2kw of power at 230V. The ME-ARTR Router is required for parallel stacking the MS-PE Series. Power Factor Corrected (PFC) Charger: Our PFC charger is built into all of our inverter chargers. It uses less energy from a generator than a standard charger – using 25-30% less AC current than standard chargers. Safe and reliable: The MS-PE Series is listed to the stringent requirements of CE for renewable energy installations.
Part #MS4348PE
Contact us to request pricing, availability and customization options
Contact Us
|
MS4124PE |
MS4348PE |
Input battery voltage range |
18 - 34 VDC |
36 - 64 VDC |
Nominal AC output voltage |
230 VAC ±5% |
230 VAC ±5% |
Output frequency and accuracy |
50 Hz ± 0.4 Hz |
50 Hz ± 0.4 Hz |
Total Harmonic Distortion (THD) |
< 5% |
< 5% |
1 msec surge current (amps AC) |
65 |
75 |
100 msec surge current (amps AC) |
30 |
37 |
5 sec surge power (real watts) |
6300 |
7500 |
30 sec surge power (real watts) |
5300 |
7100 |
5 min surge power (real watts) |
4750 |
6600 |
30 min surge power (real watts) |
4600 |
5000 |
Continuous power output at 25° C |
4100 VA |
4300 VA |
Maximum continuous input current |
273 ADC |
143 ADC |
Inverter efficiency (peak) |
90% |
91% |
Transfer time |
~ 20 ms |
~ 20 ms |
Search mode (typical) |
9 watts |
10 watts |
No load (230 VAC output, typical) |
30 watts |
28 watts |
Waveform |
Pure Sine Wave |
Pure Sine Wave |
|
MS4124PE |
MS4348PE |
Continuous output at 25° C |
105 ADC |
55 ADC |
Charger efficiency |
88% |
91% |
Power factor |
> .95 |
> .95 |
Input current at rated output (AC amps) |
14 |
16 |
Transfer relay capability |
30 amps AC |
|
Five stage charging capability |
Bulk, Absorb, Float, Equalize (requires remote), and Battery Saver™ |
|
Battery temperature compensation |
Yes, 4.6 m (15’) Battery Temp Sensor standard |
|
Internal cooling |
0 to 120 cfm variable speed drive using dual 92mm brushless DC fans |
|
Overcurrent protection |
Yes, with two overlapping circuits |
|
Overtemperature protection |
Yes on transformer, MOSFETS, and battery |
|
Corrosion protection |
Yes, PCB’s conformal coated, powder coated chassis/top, and stainless steel fasteners |
|
Listings |
CE |
|
Warranty |
Two years |