Stock Distributors

Part #PT-100

Need more information?

Contact us to request pricing, availability and customization options

Contact Us

Features

  • High Efficiency – The PT-100 provides typical 99% conversion efficiency and uses less than four watts of power in nighttime mode.
  • MPPT – Maximum Power Point Tracking technology for increased PV power output efficiency.
  • Voltage Options – Compatible with 12, 24, or 48V battery systems with automatic detection of system voltage. The PT-100 will produce up to 100 amps regardless of battery voltage.
  • Supports a Large PV Array – A single controller supports a large PV array up to 6600W. Larger PV arrays may be used because the PT-100 is current limited to 100 amps for maximum harvest.
  • Optimal Battery Charging – Automatic battery temperature compensation using an included external temperature sensor for optimum battery charging, even during extreme temperature changes.
  • Multi-stage Charging – Maximizes system performance and improves battery life.
  • GFDI: Integrated PV Ground-Fault Detection and Interruption/ Indication, with pre-fault leakage/diagnostic metering.
  • LED Indicators and Screen – Multiple LED indicators and large digital LED screen on front panel for easy-to-read system information.
  • On-site Updates – The PT-100’s software can be updated on site.
  • Extensive Electronic Protection – Over-temperature protection, power derating when temperature is high, PV short circuit and high PV input shutdown, output overcurrent protection and night-time back-feed (reverse current) protection.
  • AFCI – An integrated PV Arc-Fault Circuit Interrupter detects, indicates, and extinguishes series arcs.
  • Convenient Installation – Run all of the wiring to the unique, remain-in-place wiring box with ease prior to installing the full PT-100 unit.
  • Easy MP and MMP integration – The PT-100 is designed to work with a Magnum Panel (MP) or Mini-Magnum Panel (MMP). It provides room and access to PV and battery disconnect breakers.

Optional Remote (Requires Magnum Inverter)

  • Built-in programmable auxiliary relay for device control.
  • Internal data logging functionality keeps energy harvest information and battery Ahr/Whr data up to 255 days. Use the optional remote to display this information.

Model Numbers

  • PT-100

Specifications

Maximum PV input voltage (any condition) 200 VDC + battery voltage or 240 VDC - whichever is lower
Maximum PV operating voltage 187 VDC
Maximum PV array short circuit current 100 ADC
Nominal battery voltage range 12, 24, or 48 VDC
Battery charger output voltage range 10 to 66 VDC
Continuous charger output current 100 ADC (from -20° C to +40° C) with proportional power reduction up to 60° C ambient
Maximum output power 6600 watts
Efficiency 99% typical
Tare loss / nighttime power consumption <4 watts (fan off, display/LEDs off)
Charger regulation method Automatic three-stage (bulk, absorption, float) charge with manual equalization
Battery temperature compensation With Battery Temperature Sensor (BTS) connected (battery temperature -20° C to +55° C)
Internal cooling Using dual ball-bearing fans for long life
Overcurrent protection With two overlapping circuits
Over-temperature protection On transformer and MOSFETS
Listings ETL Listed to UL/cUL 1741, CSA C22.2 #107.1-01, CE
Warranty Five years parts and labor
Operating temperature -20° C to +60° C (-4° F to 140° F)
Nonoperating temperature -40° C to +70° C (-40° F to 158° F)
Operating humidity 0 to 95% RH non condensing
Enclosure type Indoor, ventilated, with removable powder-coated conduit box
Unit dimensions (w x h x d) 8.5” x 15.5” x 4.0” (21.6 cm x 39.4 cm x 10.2 cm)
Shipping dimensions (w x h x d) 11.5” x 19.5” x 8.125” (29.2 cm x 49.5 cm x 20.6 cm)
Mounting Mounted on a vertical surface (wall) or installed on MP or MMP enclosure
Weight 13.6 lb (6.2 kg)
Shipping weight 18 lb (8.2 kg)
Max operating altitude 15,000’ (4570 m)
  • Renewable Energy Systems
    • Off-grid Power
    • Back-up Power
  • Works as a stand-alone controller using internal settings
  • Works with a Magnum Inverter/Charger and Magnum Remote. Menu settings for the PT-100 are currently only available via the ME-ARC Remote or ME-ARTR Router