Please note that the EX15 Series is an obsolete product that is replaced by the L15 Series.
Contact us to request pricing, availability and customization options
Contact UsDiameter | 1.54” | ||
Height | 1.45” | ||
Shaft Size | .25” | ||
Weight | 3 ounces | ||
Acceleration | 200,000 rad./sec. Max | ||
Shaft Load | Axial 5lb. Radial 5lb. | ||
Torque | Less than 0.5 ounce inch | ||
Bearings | Sealed ABEC 3 |
Mounting Holes | 4 Places #4-40 @ 90° on 1.10” B.C. | ||
Servo Mount | Designed to accommodate motor mount cleat “PIC type” L2-2 | ||
Shaft Coupling | Must be flexible (do not hard mount) |
Code | Incremental | ||
Output Format | Dual channel quadrature, min. edge separation 45° | ||
Output Type EX152/EX153 | Square wave TTL & CMOS. 16mA sink. 500 μ A source short circuit protected |
||
Output Type EX156 | TTL differential line driver (26LS31) or equivalent should be terminated into a line receiver (26LS32) or equivalent circuit |
||
Frequency Response | See figure 7 | ||
Rise Time | Less than 1.0 μ sec |