SHG-TS Incremental Linear Encoder
Position Sensors & Encoders
The SHG-TS linear encoder is compatible with the majority of PLC and CNC controls. It has a series of four selectable reference markers spaced every 25.4mm. The reference mark selected to be active is dependent on the rotational alignment of the scale relative to the reader head upon installation.
Industries
Distributors Stock
Need more information?
Contact us to request pricing, availability and customization options
Contact UsSpecifications
| Output signal | TTL Differential A Quad B |
| Accuracy / meter | +/- 0.0004" (+/- 10 μm) |
| Resolutions | 10 μm, 5 μm, 2 μm, 1 μm, or 0.5 μm |
| Scale travels | 2" to 462" (51 mm to 11.73 m) |
| Scale diameter | 0.601" (15.25 mm) |
| Reader head dimensions | 2.05"H x 5.16"L x 1.10"D (52 mm x 131 mm x 28 mm) |
| Reference marker | Single (select 1 of 4) |
| Equivalent line count / inch | 635, 1270, 3175, 6350, 12700 |
| Maximum traverse rate | 65.6' (20m) / second (10μm), pro-rated to resolution |
| Power supply | 5 VDC +/- 5%, < 80 mA |
| Shock (11 ms) | 100g (IEC 69-2-6) |
| Vibration (55-2000 Hz) | 30g (IEC 68-2-27) |
| Sample period | 100 μs |
| Environmental rating | IP67, fully submersible (IEC 529) - exceeds NEMA 6 |
| Operating temperature | 32°F to 131°F (0°C to 55°C) |
| Coefficient of expansion | 12 x 10-6 K |
| Scale material | 316 stainless steel |
| Overall scale length | Scale travel length + 10.2" (258 mm) |
| Standard cable | 9 core, 11.5' (3.5 m) armored |
| Maximum cable length | 72.2' (22 m) |
| Standard connector | 9 pin "D" type |
| EMC compliance | BS EN 50081-2 and BS EN 61000-6-2 |
| Resolutions | Custom resolutions available |
| Non-armored cable | PUR (polyurethane) |
| Connectors |
|
| Cable lengths | 22' (7m) or 19.68" (0.5m) |
