Distributors Stock

Part #DR2260A20U

Need more information?

Contact us to request pricing, availability and customization options

Contact Us

Features

  • Output ratings up to 35 Amps at 600 VAC
  • Built-in overvoltage protection
  • Relay or Contactor configuration
  • Integral heat sink eliminates the need for complex thermal calculations
  • DBC substrate for superior thermal performance
  • “Elevator” screw option to allow the use of ring or lug type terminals
  • IP20 touch-safe housing
  • AC or DC control
  • C-UL-US and TUV approved

Specifications

Description 20 A 30 A 35 A
Operating Voltage (47-440Hz) [Vrms] 48-600 48-600 48-600
Transient Overvoltage [Vpk] 1200 1200 1200
Maximum Off-State Leakage Current @ Rated Voltage [mArms] 1 1 1
Minimum Off-State dv/dt @ Maximum Rated Voltage [V/μsec] 500 500 500
Load Current, General Use UL508/LC A IEC 62314 @ 40°C [Arms] 20 30 35
Load Current, Motor Starting UL508 FLA/LC B IEC 62314 @ 40°C [Arms] 8.5/4.8 14/7.6 24/14
Minimum Load Current [mArms] 100 100 150
Maximum 1 Cycle Surge Current (50/60Hz) [Apk] 286/300 716/750 1290/1350
Maximum On-State Voltage Drop @ Rated Current [Vpk] 1.35 1.35 1.30
Maximum 1/2 Cycle I² t for Fusing (50/60Hz) [A² sec] 409/375 2563/2343 8320/7593
Minimum Power Factor (at Maximum Load) 0.5 0.5 0.5
Motor Rating UL 508/IEC62314 [HP (kW)]: 120 VAC 0.5 (0.37) 1 (0.74) 2 (1.5)
Motor Rating UL 508/IEC62314 [HP (kW)]: 240 VAC 1.5 (1.1) 3 (2.2) 5 (3.73)
Motor Rating UL 508/IEC62314 [HP (kW)]: 480 VAC 3 (2.24) 5 (3.7) 10 (7.4)
Description DR2260Dxxx DR2260Axxx
Control Voltage Range 4-32 VDC 5 90-280 VAC/VDC 6
Maximum Reverse Voltage -32 VDC -
Minimum Turn-On Voltage 4 VDC 90 VAC/VDC
Must Turn-Off Voltage 1 VDC 5 VAC/VDC
Minimum Input Current (for on-state) 7 mA 6 mA
Maximum Input Current 15 mA 10 mA
Nominal Input Impedance Current Regulated Current Limited
Maximum Turn-On Time [msec] 1/2 Cycle 7 20
Maximum Turn-Off Time [msec] 1/2 Cycle 30
Description Parameters
Dielectric Strength, Input to Output (50/60Hz) 4000 Vrms
Dielectric Strength, Input/Output to Case (50/60Hz) 4000 Vrms
Minimum Insulation Resistance (@ 500 VDC) 109 Ohms
Maximum Capacitance, Input/Output 8 pF
Ambient Operating Temperature Range -40 to 80 °C
Ambient Storage Temperature Range -40 to 100 °C
Short Circuit Current Rating 100kA
Weight (typical) Option “U” 10.5 oz (298 g), Option “V”,“W” 10.6 oz (301 g)
Housing Material UL94 V-0
Heat Sink Material Aluminum
Din Rail Clip Material Zink Plated Steel
Hardware Finish Nickel Plating
Input Terminal Screw Torque Range (lb-in/Nm) Option “U” 13-15/1.5-1.7, Option “V”,“W” 5/0.5 10
Load Terminal Screw Torque Range (lb-in/Nm) Option “U” 13-15/1.5-1.7, Option “V”,“W” 18-20/2-2.2
Humidity 95% non-condensing
LED Input Status Indicator Green

Related Resources