Distributors Stock
Part #DR2260A20VJ
Need more information?
Contact us to request pricing, availability and customization options
Contact UsFeatures
- Output ratings up to 35 Amps at 600 VAC
- Built-in overvoltage protection
- Relay or Contactor configuration
- Integral heat sink eliminates the need for complex thermal calculations
- DBC substrate for superior thermal performance
- “Elevator” screw option to allow the use of ring or lug type terminals
- IP20 touch-safe housing
- AC or DC control
- C-UL-US and TUV approved
Specifications
| Description | 20 A | 30 A | 35 A |
| Operating Voltage (47-440Hz) [Vrms] | 48-600 | 48-600 | 48-600 |
| Transient Overvoltage [Vpk] | 1200 | 1200 | 1200 |
| Maximum Off-State Leakage Current @ Rated Voltage [mArms] | 1 | 1 | 1 |
| Minimum Off-State dv/dt @ Maximum Rated Voltage [V/μsec] | 500 | 500 | 500 |
| Load Current, General Use UL508/LC A IEC 62314 @ 40°C [Arms] | 20 | 30 | 35 |
| Load Current, Motor Starting UL508 FLA/LC B IEC 62314 @ 40°C [Arms] | 8.5/4.8 | 14/7.6 | 24/14 |
| Minimum Load Current [mArms] | 100 | 100 | 150 |
| Maximum 1 Cycle Surge Current (50/60Hz) [Apk] | 286/300 | 716/750 | 1290/1350 |
| Maximum On-State Voltage Drop @ Rated Current [Vpk] | 1.35 | 1.35 | 1.30 |
| Maximum 1/2 Cycle I² t for Fusing (50/60Hz) [A² sec] | 409/375 | 2563/2343 | 8320/7593 |
| Minimum Power Factor (at Maximum Load) | 0.5 | 0.5 | 0.5 |
| Motor Rating UL 508/IEC62314 [HP (kW)]: 120 VAC | 0.5 (0.37) | 1 (0.74) | 2 (1.5) |
| Motor Rating UL 508/IEC62314 [HP (kW)]: 240 VAC | 1.5 (1.1) | 3 (2.2) | 5 (3.73) |
| Motor Rating UL 508/IEC62314 [HP (kW)]: 480 VAC | 3 (2.24) | 5 (3.7) | 10 (7.4) |
| Description | DR2260Dxxx | DR2260Axxx |
| Control Voltage Range | 4-32 VDC 5 | 90-280 VAC/VDC 6 |
| Maximum Reverse Voltage | -32 VDC | - |
| Minimum Turn-On Voltage | 4 VDC | 90 VAC/VDC |
| Must Turn-Off Voltage | 1 VDC | 5 VAC/VDC |
| Minimum Input Current (for on-state) | 7 mA | 6 mA |
| Maximum Input Current | 15 mA | 10 mA |
| Nominal Input Impedance | Current Regulated | Current Limited |
| Maximum Turn-On Time [msec] | 1/2 Cycle 7 | 20 |
| Maximum Turn-Off Time [msec] | 1/2 Cycle | 30 |
| Description | Parameters |
| Dielectric Strength, Input to Output (50/60Hz) | 4000 Vrms |
| Dielectric Strength, Input/Output to Case (50/60Hz) | 4000 Vrms |
| Minimum Insulation Resistance (@ 500 VDC) | 109 Ohms |
| Maximum Capacitance, Input/Output | 8 pF |
| Ambient Operating Temperature Range | -40 to 80 °C |
| Ambient Storage Temperature Range | -40 to 100 °C |
| Short Circuit Current Rating | 100kA |
| Weight (typical) | Option “U” 10.5 oz (298 g), Option “V”,“W” 10.6 oz (301 g) |
| Housing Material | UL94 V-0 |
| Heat Sink Material | Aluminum |
| Din Rail Clip Material | Zink Plated Steel |
| Hardware Finish | Nickel Plating |
| Input Terminal Screw Torque Range (lb-in/Nm) | Option “U” 13-15/1.5-1.7, Option “V”,“W” 5/0.5 10 |
| Load Terminal Screw Torque Range (lb-in/Nm) | Option “U” 13-15/1.5-1.7, Option “V”,“W” 18-20/2-2.2 |
| Humidity | 95% non-condensing |
| LED Input Status Indicator | Green |