6024 Series Combosense™ Temperature Sensor & Thermostat Probe
Temperature
The Airpax™ 6024 thermal sensor-switch offers the function and reliability of a grounded case snap-action thermostat with the sensing capability of a solid-state thermistor in a single economical package. The switch is available in temperature ranges from 40°C to 130°C, with a variety of terminal and body options.
The 6024 Series is ideal for sensing engine oil/coolant or transmission fluid for overheat conditions. Additionally, it provides a solution for engine applications where mounting holes are limited.
Industries
Distributors Stock
Need more information?
Contact us to request pricing, availability and customization options
Contact UsFeatures
- Thermostat & temperature sensor in one robust package
- Stainless steel or brass construction
- Ideal for immersion sensing where mounting holes are limited
Specifications
| Contact Ratings | Cycles 30,000 |
Voltage 120VAC / 48VDC |
Amps 1 (resistive) |
| Contact Operations | Either close on rise (make) or open on rise (break), SPST (Single Pole, Single Throw) | ||
| Operating Temperature | 40ºC to 130ºC (104ºF to 266ºF), std tolerance ±5ºC (±8ºF) | ||
| Dielectric Strength | 500 VAC, 60Hz thermostat terminals to case across open contacts Note: Do not apply dielectric test voltage to the thermistor terminal as permanent damage could occur to the sensor element |
||
| Insulation Resistance | 50 megaohms, minimum at 500 VDC | ||
| Vibration | .06DA, 10-55 Hz, 20G 10-2000 Hz | ||
| Shock | 75G 6ms duration (sawtooth) | ||
| Materials | Stainless steel or brass body and tube, Mylar sleeve, epoxy fill potting, stainless or plated steel terminals, fine silver contacts, gold-plated crossbar for low level switching |
||
| Solid-State Sensor | Conventional NTC (Ngative Temperature Coefficient) and PTC (Positive Temperature Conefficient) thermistors available. Specific resistance values and tolerances are per customer specifications. |
| Operating Temperature | -40ºC to 120ºC (-40ºF to 248ºF) (other ranges available) |
| Contact Operation | Basic Product Series | Terminal Selection | Mounting Thread Selection | Tube Length Selection | Non-Descript from Sensata |
|
O = Open on Rise C = Close on Rise |
6024 |
A-F = Reference Table 1 Z = Special Requirements, Customer to Specify |
A-D = Reference Table 2 Z = Special Requirements, Customer to Specify |
A-B = Reference Table 3 Z = Special Requirements, Customer to Specify |
Non-descript assigned for thermostat temperature and thermistor selection. |