Resource | 08/14/2023

Manual: Lithium Balance c-BMS Creator BMS CREATOR™ PC Configuration Toolbox

The LiBAL c-BMS CREATOR™ manual guides you on system architecture, communication setup, and essential functions like boot loading and configuration. Explore system, charger, and GPIO configurations, as well as custom data processing and CAN settings. Navigate error handling, SOC OCV, and live view options for comprehensive control, while monitoring temperatures and logging data effectively. 

Learn More
Resource | 03/16/2023

Manual: Safety Manual for the SIM100 Family

A guide to using the SIM100 family of isolation monitors in safety-related systems.

Learn More
Resource | 03/16/2023

Manual: Required Y Caps for the SIM100 Family

The SIM100 family relies on the presence of the ubiquitous Y-capacitors in the application system to perform its safety functions.

Learn More
Resource | 03/16/2023

Manual: Proper Connection of the SIM100 Family

A guide for the proper connection of the SIM100 family to the host system.

Learn More
Resource | 09/29/2022

Manual: MXC and GXC Smart-Tactors User Manual

User Manual for the Sensata | Gigavac MXC/GXC Series Smart-Tactors.

Download this user manual to continue reading.

Learn More
Resource | 08/27/2021

Manual: PTE7300 Instructions & Safety Information

  • The pressure sensor detects the system pressure and converts it into an I2C output signal.
  • These operating instructions contain important information on handling the instr

Learn More
Resource | 08/27/2021

Manual: PTE7100 Instructions & Safety Information

  • The PTE7100 pressure sensor detects the system pressure and converts it into an analog output signal.
  • These operating instructions contain important information on handling the instr

Learn More
Resource | 06/16/2021

Manual: M700 Hydraulic Pump Motor Controller

M700 is a high-power hydraulic pump controller that provides fully programmable control of DC series wound motors.

Learn More
Resource | 01/10/2019

Manual: Absolute Rotary Position Sensors with CAN-BUS Interface

This manual describes the implementing and configuration of an absolute rotary encoder with CANopen interface.

Learn More
Resource | 09/03/2018

Manual: Absolute Rotary Encoder with PROFINET Interface

User Manual for MHK5 Encoders

MHX5-EIB1B-XXXX-XXXX-XXX

This manual describes the implementation and configuration of an absolute rotary encoder with PROFINET interface.

Learn More
Resource | 08/22/2018

Manual: Absolute Multi-Turn Rotary Encoder with ETHERNET IP-Interface

User Manual for MHM5 & MHK5 Encoders with ETHERNET IP-Interface

MHM5-EEA1B-XXXX-XXXX-PRM

Learn More
Resource | 06/06/2018

Manual: MAAX-MAUX Series PROFIBUS

This manual describes installation and configuration of an Absolute Rotary Encoder with Profibus DP interface.

Learn More