The MS Series Inverter/Charger – a pure sine wave inverter designed specifically for the most demanding mobile, backup, and off-grid applications. The MS Series Inverter/Charger is powerful, easy-to-use, and best of all, cost effective.
Battery Profile Presets: Using the ME-RC, ME-ARC, or ME-MR Remote Controls, easily choose from and set standard battery profiles, including Lithium Iron Phosphate (LFP) – only available via the ME-RC and ME-MR, Gel, Flooded, AGM1, and AGM2.
Power Factor Corrected (PFC) Charger: Our PFC charger is built into all of our inverter/chargers. It uses less energy from a generator than a standard charger – using 25-30% less AC current than standard chargers.
Expanded Transfer Relay: 60 Amp transfer service is available on all models except MS2000, which is 30 Amp only.
Part #MS2000 (MS2000-GL, MS2000-L-U, MS2000-L-F, MS2000-15BL-U, MS2000-20BL-U, MS2000-20BL-F)
Contact us to request pricing, availability and customization options
Contact Us
|
MS2000/12 MS2012 (-15/-20B) |
MS2812 |
MS2024 |
MS4024 |
MS4048 MS4048-20B |
Input battery voltage range |
9 - 16.8 VDC |
9 - 16.8 VDC |
18 - 33.6 VDC |
18 - 33.6 VDC |
36 - 67.6 VDC |
AC output voltage accuracy |
120 VAC ± 5% |
120 VAC ± 5% |
120 VAC ± 5% |
120 VAC ± 5% |
120 VAC ± 5% |
Output frequency and accuracy |
60 Hz ± 0.1 Hz |
60 Hz ± 0.1 Hz |
60 Hz ± 0.1 Hz |
60 Hz ± 0.1 Hz |
60 Hz ± 0.1 Hz |
Total Harmonic Distortion (THD) |
< 5% |
< 5% |
< 5% |
< 5% |
< 5% |
1 msec surge current (amps AC) |
50 |
70 |
75 |
120 |
120 |
100 msec surge current (amps AC) |
33 |
40 |
37 |
82 |
72 |
5 sec surge power (real watts) |
3300 |
3900 |
2850 |
5800 |
8500 |
30 sec surge power (real watts) |
3100 |
3800 |
2750 |
5400 |
5750 |
5 min surge power (real watts) |
2800 |
3200 |
2700 |
4900 |
5250 |
30 min surge power (real watts) |
2200 |
3000 |
2200 |
4500 |
4750 |
Output power (continuous watts) |
2000 |
2800 |
2000 |
4000 |
4000 |
Maximum continuous input current |
267 ADC |
373 ADC |
133 ADC |
267 ADC |
133 ADC |
Inverter efficiency (peak) |
90.6% |
90% |
86% |
93.7% |
94% |
AC Relay Transfer time (minimum) |
16 msecs |
16 msecs |
16 msecs |
16 msecs |
16 msecs |
Power Consumption - searching |
<8 watts |
<8 watts |
<8 watts |
<8 watts |
<8 watts |
Power Consumption - inverting (no load) |
25 watts |
30 watts |
25 watts |
25 watts |
25 watts |
Output Waveform |
Pure Sine Wave |
Pure Sine Wave |
Pure Sine Wave |
Pure Sine Wave |
Pure Sine Wave |
|
MS2000/12 MS2012 (-15/-20B) |
MS2812 |
MS2024 |
MS4024 |
MS4048 MS4048-20B |
Continuous output at 25° C |
100 ADC |
125 ADC |
60 ADC |
105 ADC |
60 ADC |
Charger efficiency |
85% |
85% |
85% |
85% |
85% |
Power factor |
> .95 |
> .95 |
> .95 |
> .95 |
> .95 |
Input current for continuous rated output |
15 AAC |
18 AAC |
7.9 AAC |
29 AAC |
30 AAC |
Transfer relay capability |
30 ACC max. each input (30AC total on MS2000 models, 60ACC total on all other models)* |
||||
Five stage charging capability |
Bulk, Absorb, Float, Equalize (requires remote), and Battery Saver™ |
||||
Battery temperature compensation |
Standard with available temp sensor connected (battery temp 0-50° C) |
||||
Internal cooling |
0 to 120 cfm variable speed drive using dual 92mm brushless DC fans |
||||
Overcurrent protection |
Yes, with two overlapping circuits |
||||
Overtemperature protection |
Yes on transformer, MOSFETS, and battery |
||||
Corrosion protection |
Yes, PCB’s conformal coated, powder coated chassis/top, and stainless steel fasteners |
||||
Branch-rated output circuit breakers |
Optional on the MS2000 (15 or 20 amp breakers), MS2012 (15 or 20 amp breakers) or MS4048 (20amp breakers) |