MSH-M Series Inverter/Charger

Distributors Stock

Pure sine wave – Power your T.V.s, stereos, plasma screens, and other sensitive electronics without worry. The pure sine wave inverter and power factor corrected charger provide clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.
Easy-to-install – Install the MSH-M Series in four easy steps: simply connect the inverter’s output to your distribution circuits or electrical panel, connect your utility power cable to the inverter’s easy-to-reach terminal block, connect the batteries, and switch on the power.
Interchangeable – The MSH-M is interchangeable with the Magnum MS Series and uses the same accessories as the MS Series.
Lightweight – The lightweight aluminum base and cover also provides noise reduction and corrosion resistance. Multiple ports – The MSH-M Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.
Accessible design – The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter more accessible when it needs to be.
Convenient switches – The MSH-M Series comes with an on /off inverter-mounted switch with an easy-to-read LED indicator.
Buy with ease – The MSH-M Series is backed by a threeyear (36-month) limited warranty.

The MSH-M Series comes in 12 and 24 volt configurations, allowing you to choose the model that is right for you.

Inverter Charger Features and Capabilities Environmental Physical Industries

	MSH3012M	MSH4024M
Input battery voltage range	9 to 17 VDC	18 to 34 VDC
Nominal AC output voltage	120 VAC ± 5%	120 VAC ± 5%
Output frequency and accuracy	60 Hz ± 0.05 Hz	60 Hz ± 0.1 Hz
Total Harmonic Distortion (THD)	< 5%	< 5%
1 msec surge current (amps AC)	70	120
100 msec surge current (amps AC)	40	82
5 sec surge power (real watts)	3900	5800
30 sec surge power (real watts)	3800	5400
5 min surge power (real watts)	3200	4900
30 min surge power (real watts)	3000	4500
Continuous power output at 25° C	3000 VA	4000 VA
Maximum continuous input current	400 ADC	267 ADC
Inverter efficiency (peak)	90.0%	93.7%
Transfer time	16 msecs	16 msecs
Search mode (typical)	< 8 watts	< 8 watts
No load (230 VAC output, typical)	30 watts	25 watts
Waveform	Pure Sine Wave	Pure Sine Wave

	MSH3012M	MSH4024M
Continuous output at 25° C	125 ADC	110 ADC
Charger efficiency (peak)	87%	87%
Power factor	> .95	> .95
Input current at rated output (AC amps)	18	28

	MSH3012M	MSH4024M
Transfer relay capability	60 AAC
Five stage charging capability	Bulk, Absorb, Float, Equalize (requires remote), and Battery Saver™
Battery temperature compensation	Standard with available temp sensor connected (battery temp 0 - 50 °C)
Internal cooling	0 to 120 cfm variable speed drive using dual 92mm brushless DC fans
Overcurrent protection	Yes, with two overlapping circuits
Overtemperature protection	Yes on transformer, MOSFETS, and battery
Corrosion protection	Yes, PCB’s conformal coated, powder coated chassis/top, and stainless steel fasteners
Dual AC branch rated output breakers	No
Listings	ETL listed to UL/cUL 458, CSA C22.2 No. 107.1-01
Warranty	Three years parts and labor

	MSH3012M	MSH4024M
Temperature (Operating/Non-operating)	-20° C to +60° C (-4° F to 140° F) to -40° C to +70° C (-40° F to 158° F)
Operating humidity	0 to 95% RH non-condensing

	MSH3012M	MSH4024M
Dimensions (l x w x h)	13.75” x 12.65” x 8.0” (34.9 cm x 32.1 cm x 20.3 cm)
Shipping dimensions (l x w x h)	19” x 17” x 13” (48.3 cm x 43.2 cm x 33 cm)
Mounting	Shelf or wall (vents not allowed to face downward unless ME-CB or MPX-CB is installed)
Unit Weight	55 lb (24.9 kg)
Shipping weight	63 lb (28.6 kg)
Max operating altitude	15,000’ (4570 m)