MSH-RE Series Inverter/Charger MSH4024RE
Inverters & Chargers
The MSH-RE Series Inverter / Charger from Sensata | Magnum-Dimensions – a pure sine wave inverter that combines the tried and tested engineering of Sensata’s MS line with hybrid technology to make it an optimal choice for your renewable and backup power needs. Hybrid technology: Most inverters only use one source of energy to power loads, either from incoming AC power – utility or AC generator – or from the batteries.
The MSH-RE Series combines the energy from both sources to power loads. This allows the inverter to recharge the batteries when there is surplus power or deliver more power to the loads if they require more than the AC input can supply by itself.
Load support: Load support parallels the inverter output with incoming AC sources allowing it to run larger loads from smaller generators
Industries
Distributors Stock
Part #MSH4024RE
Need more information?
Contact us to request pricing, availability and customization options
Contact UsFeatures
- Pure sine wave – Power your T.V.s, stereos, plasma screens, and other sensitive electronics without worry. The pure sine wave inverter and power factor corrected charger provide clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.
- Easy-to-install – Install the MSH-RE Series in four easy steps: simply connect the inverter’s output to your distribution circuits or electrical panel, connect your utility power cable to the inverter’s easy-to-reach terminal block, connect the batteries, and switch on the power.
- Dual AC inputs – The MSH-RE Series comes with two 60 amp AC inputs – a grid input at 60A and a generator input at 60A.
- Accessible design – The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter more accessible when it needs to be.
- Interchangeable – The MSH-RE is interchangeable with the Magnum MS Series and uses the same accessories as the MS Series.
- Lightweight – The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.
- Multiple ports – The MSH-RE Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.
- Convenient switches – The MSH-RE Series comes with an on/ off inverter-mounted switch with an easy-to-read LED indicator.
- Buy with ease – The MSH-RE Series is backed by a three-year (36-month) limited warranty, and a five-year limited warranty when purchased with and installed on an MMP system.
Downloads
Specifications
| Input battery voltage | 18 - 34 VDC |
| Nominal AC output voltage | 120 VAC ± 3% |
| Output frequency and accuracy | 60 Hz ± 0.05 Hz |
| Total Harmonic Distortion (THD) | < 5% |
| 1 msec surge current (amps AC) | 120 |
| 100 msec surge current (amps AC) | 82 |
| 5 sec surge power (real watts) | 5800 |
| 30 sec surge power (real watts) | 5400 |
| 5 min surge power (real watts) | 4900 |
| 30 min surge power (real watts) | 4500 |
| Continuous power output at 25° C | 4000 VA |
| Maximum continuous input current | 267 ADC |
| Inverter efficiency (peak) | 93.7% |
| Transfer time | < 16 msecs |
| Search mode (typical) | < 7 watts |
| No load (230 VAC output, typical) | 25 watts |
| Waveform | Pure Sine Wave |
| Continuous output at 25° C | 110 ADC |
| Charger efficiency | 85% |
| Power factor | > .95 |
| Input current at rated output (AC amps) | 29 |
| Transfer relay capability | 60 AAC maximum each input |
| Five stage charging capability | Bulk, Absorb, Float, Equalize (requires remote), and Battery Saver™ |
| Battery temperature compensation | Standard with available temp sensor connected (battery temp 0 - 50 °C) |
| Internal cooling | 0 to 120 cfm variable speed drive using dual 92mm brushless DC fans |
| Overcurrent protection | Yes, with two overlapping circuits |
| Overtemperature protection | Yes on transformer, MOSFETS, and battery |
| Corrosion protection | Yes, PCB’s conformal coated, powder coated chassis/top, and stainless steel fasteners |
| Dual AC branch rated output breakers | No |
| Listings | ETL listed to UL/cUL 1741, CSA C22.2 No. 107.1-01 |
| Warranty | Three years parts and labor |
| Temperature (Operating/Non-operating) | -20° C to +60° C (-4° F to 140° F) to -40° C to +70° C (-40° F to 158° F) |
| Operating humidity | 0 to 95% RH non-condensing |
| Physical Specifications | |
| Dimensions (l x w x h) | 13.75” x 12.65” x 8.0” (34.9 cm x 32.1 cm x 20.3 cm) |
| Shipping dimensions (l x w x h) | 19” x 17” x 13” (48.3 cm x 43.2 cm x 33 cm) |
| Mounting | Shelf or wall (vents not allowed to face downward unless ME-CB or MMP is installed) |
| Weight | 58 lb (26.3 kg) |
| Shipping weight | 60 lb (27.2 kg) |
| Max operating altitude | 15,000’ (4570 m) |
- Renewable Energy Systems
Related Products
View All Products
AGS Automatic Generator Start Module 3-relay with Voltage and Temp Start/Network Version ME-AGS-N
Inverters & Chargers
View Product
BMK Battery Monitoring Kit - Battery State of Charge Meter (Includes 500A/50mV DC Shunt) ME-BMK
Inverters & Chargers
View Product
BMK Battery Monitoring Kit, NO DC SHUNT - Battery State of Charge Meter ME-BMK-NS
Inverters & Chargers
View Product
