Stock Distributors

Part #01039-1308

Need more information?

Contact us to request pricing, availability and customization options

Contact Us

Specifications

Shaft Diameter 3/8" and 1/4" diameters standard.
Flat on Shaft Standard on 3/8" shaft, 0.60" long; Special feature on 1/4" shaft
Shaft Loading 3/8" shaft: Up to 10 lbs axial and 20 lbs radial
Shaft Runout .001 T.I.R. maximum
Starting Torque at 25°C 1.0 in-oz max. without shaft seal; 2.5 in-oz max with shaft seal
Bearings High precision ball bearings, Material: Chrome steel
Shaft Material Stainless Steel
Bearing Housing Die cast aluminum with protective finish
Cover Die cast aluminum with protective finish
Bearing Life 2x108 revs at rated load, 1 x 1010 revs at 10% rated load
Maximum RPM 10,000 RPM (see frequency response, below)
Moment of Inertia 2.56 X 10-4 oz-in-sec2
Weight 9 oz. typical
Code Incremental
Output Format 2 outputs in quadrature, A leads B CCW, 1/2 cycle index, Z, gated with negative B
Consult factory for other output formats.
Cycles per Shaft Turn 1 to 10000
Supply Voltage 5 to 28 VDC +/- 5%
Current Requirements 100 mA typical + output load, 250 mA (max)
Voltage/Output 28/V: Multi-Voltage Line Drive, 5-28 VDC in, Vout = Vin
28/5: TTL, RS422 Line Driver, 5-28 VDC in, Vout = 5 VDC
28/O: NPN Line Driver Open Collector, 5-28 VDC in, NPN out (30V MAX)
28/VR, HTL Line Driver 5-28 VDC in, Vout=Vin 120 mA per channel
5, 12, 15 or 24/OR: R=100 ohm / V: 5V=470 ohm, 15V=1.5K ext. l
Protection Level Reverse, overvoltage and line driver output protection diodes
Frequency Response 300 kHz

table.tableizer-table { font-size: 12px; border: 1px solid #CCC; font-family: Arial, Helvetica, sans-serif; } .tableizer-table td { padding: 4px; margin: 3px; border: 1px solid #CCC; } .tableizer-table th { background-color: #104E8B; color: #FFF; font-weight: bold; }

Enclosure Rating IP66 when ordered with shaft seal and MS connector on cover. IP65 when ordered with shaft seal and cable gland. IP50 when ordered with no shaft seal.
Temperature Operating temperature -40° C up to 85° C standard. Check factory for higher temperature options.
Storage temperature -40° C to 100° C
Shock 100 g's for 5 msec duration
Vibration 50 to 2000 Hz @ 30grms
Humidity 98% RH without condensation

 

Type Family Housing Configuration Pilot Configuration Shaft Diameter Shaft Type Face Mount Shaft Seal Cycles Per Turn No. of Channels Complements Voltage/Output Output Termination Location Output Termination Hazardous Area Ratings Special Features
X = Express (3 days leadtime)
Blank = Standard Leadtime
H20 = Heavy duty, 2.0" dia. D = Square Flange
E = 2.00 Diameter Servo Mount
See dimensions
A = 1.181 (30mm) Female
B = 1.25 x .125 Pilot
Blank when ordering BS, HS or TS shaft types
25 = 0.2497 / 0.2495
37 = 0.3747 / 0.3745
 
Blank = Single Ended Shaft (Standard)
BS = Blind Hollow Shaft, 1/4" bore
HS = Through Hollow Shaft, 1/4" bore
TS = Through Solid Shaft, 3/8" standard
F5, F12, F28 See Dimensions
Blank = None
SS = Shaft Seal - Available only with Pilot Configuration Option B
Blank = No Shaft Seal
1 to 10000
Examples: 100 = 100 CPT, 1024 = 1024 CPT, 4096 = 4096 CPT, etc.
A = Single Channel
AB = Dual Quad. Channel
ABZ = Dual with Index
AZ = Single with Index
C = Complementary Outputs
Blank = None

28/V = 5-28Vin/out
28/5 = 5-28Vin/5Vout
28/O = 5-28Vin/OCout
28/VR = 5-28 VDC in/Vout NOTE: Not available with BS, HS and TS Shaft options
xx/OR = 05, 12, 15, 24Vin/OR

E = End
S = Side
M14 = MS3102R14S-6P
M18 = MS3102R18S-1P
M16 = MS3102R16S-1P
K8 = M12 x 1 (metric connector)
CSXX = Cable with Seal. XX is cable length in 6 inch increments starting at 24
Blank = None
EX = Intrinsically safe
NI = Non-Incendive
Contact Factory for Voltage Options
S = Special features specified on purchase order. (See notes)
Blank = no special features

Related Resources