Distributors Stock

Need more information?

Contact us to request pricing, availability and customization options

Contact Us

Specifications

Shaft Diameter 0.375” (0.5” optional)
Flat on Shaft 0.80” long x 0.030” deep
Shaft Loading 40 lbs axial, 36 lbs radial (90 lbs axial
and 80 lbs radial with 0.5” shaft)
Shaft Runout 0.0005 TIR at midpoint of shaft
Starting Torque at 25°C 2.5 in-oz (max)
Bearings Dual, preloaded, Class ABEC 7
Shaft Material 416 stainless steel
Bearing Housing Die cast aluminum with protective finish
Cover Die cast aluminum
Bearing Life 1 x 1010 at 10% rated load
Maximum RPM 6,000 (see frequency response, below)
Moment of Inertia 4.3 x 10-4 oz-in-sec2
Weight 16 oz nominal

 

Code Natural binary, gray code or SSI
Counts per Shaft Turn 4096, 12 bits
Number of Turns up to 4096, 12 bits
Supply Voltage 5–28 VDC
Current Requirements 130 mA typical + load, 250mA (max)
Voltage/Output (See note 3)
28V/V: Line Driver, 5–28 VDC in, Vout = Vin
28V/5: Line Driver, 5–28 VDC in, Vout = 5 VDC
28V/OC: Open Collector, 5–28 VDC in, OCout
SSI: 5–28 VDCin/5Vout
Frequency Response 100 kHz
Protection Level Overvoltage, reverse voltage.
Outputs short-circuit protected (1 minute max)
Output Termination Pinouts See Tables, in datasheet

 

Enclosure Rating IP66
Temperature Operating, 0° to 70° C; Extended, -40° to +85°C;
Storage, -20° to 90° C (to -40° if extended range is called out)
Shock 50 g’s 11 msec
Vibration 0.3 g’s ramp to 20 g’s from 5 to 40 Hz and 20 g’s from 40 Hz to 2000 Hz
Humidity 98% Non-condensing