Model 9960 Hall effect rotary position sensors are available in numerous standard configurations with fast, one week delivery. Available configurations include 7 termination options, single or dual outputs and 24 active electrical angles.
Contact us to request pricing, availability and customization options
Contact UsWith 360 degree turn capability, the 9960 can be used over a large range of rotary motion making it extremely versatile. Packaged in a highly sealed (IP69K) housing and utilizing non-contacting Hall effect technology makes the 9960 an exceptionally rugged and reliable sensor.
Mechanical Travel |
Continuous 360 degree and option for 180 degree mechanical stops |
Operating Torque |
0.11 N-m maximum |
Weight |
80 g (w/ 6” cable) |
Mounting |
38mm mounting center |
Drive |
Blade Ø9.53 x 2.16 wide |
Termination |
Flying leads, wire harness w/connector or integral connector (see ordering options) |
Active Electrical Angle |
15°-360º in 15º increments (no spring) |
Input Voltage |
5VDC ±5%, 9-30VDC or 15-30VDC |
Input Curent |
(per channel) 16mA maximum except for Current Loop option at 36mA max |
Overvoltage |
5V Input: 20VDC 9-30V Input: 70V per ISO 7637-2 |
Output Signal |
Analog: 1) ratiometric 5% to 95% or 10% to 90% 2) non-ratiometric 0-10VDC, 0-5VDC, 0.5-4.5VDC |
PWM: duty cycle 5% to 95% or 10% to 90% |
|
Current: 4-20 mA (3-wire) |
|
Minimum Load Resistance |
10kOhm resistive |
Resolution |
0.088 degrees (12-bit) |
Accuracy |
±0.6% of Active Electrical Angle at room temperature ±0.9% of Active Electrical Angle at temperature |
EMC |
200 V/m |
External Magnetic Susceptibility |
20G |