Part #PM2260D95VH
Contact us to request pricing, availability and customization options
Contact UsDescription | 25 A | 50 A | 95 A |
Operating Voltage (47-440Hz) [Vrms] | 48-600 | 48-600 | 48-600 |
Transient Overvoltage [Vpk] | 1200 | 1200 | 1200 |
Maximum Off-State Leakage Current @ Rated Voltage [mArms] | 1 | 1 | 1 |
Minimum Off-State dv/dt @ Maximum Rated Voltage [V/μsec] | 500 | 500 | 500 |
Load Current, General Use UL508/LC A IEC 62314 @ 40°C [Arms] | 25 | 50 | 95 |
Load Current, Motor Starting UL508 FLA/LC B IEC 62314 @ 40°C [Arms] | 8.5/4.8 | 14/7.6 | 26/14 |
Minimum Load Current [Arms] | 100 | 100 | 150 |
Maximum 1 Cycle Surge Current (50/60Hz) [Apk] | 286/300 | 716/750 | 1290/1350 |
Maximum On-State Voltage Drop @ Rated Current [Vpk] | 1.35 | 1.35 | 1.30 |
Thermal Resistance Juntion to Case (Rjc) [°C/W] | 0.49 | 0.27 | 0.2 |
Maximum 1/2 Cycle I² t for Fusing (50/60Hz) [A² sec] | 409/375 | 2563/2343 | 8320/7593 |
Minimum Heat Sink for Rated Current @ 40ºC [°C/W] | 2 | 0.7 | 0.25 |
Minimum Power Factor (at Maximum Load) | 0.5 | 0.5 | 0.5 |
Motor Rating UL 508/IEC62314 [HP (kW)]: 120 VAC | 0.5 (0.37) | 1 (0.74) | 2 (1.5) |
Motor Rating UL 508/IEC62314 [HP (kW)]: 240 VAC | 1.5 (1.1) | 3 (2.2) | 5 (3.73) |
Motor Rating UL 508/IEC62314 [HP (kW)]: 480 VAC | 3 (2.24) | 5 (3.7) | 10 (7.4) |
Description | PM2260DxxV | PM2260AxxV |
Control Voltage Range | 4-32 VDC | 90-280 VAC/VDC |
Maximum Reverse Voltage | -32 VDC | - |
Minimum Turn-On Voltage | 4 VDC | 90 VAC/VDC |
Must Turn-Off Voltage | 1 VDC | 5 VAC/VDC |
Minimum Input Current (for on-state) | 10 mA | 6 mA |
Maximum Input Current | 15 mA | 10 mA |
Nominal Input Impedance | Current Regulated | Current Limited |
Maximum Turn-On Time [msec] | 1/2 Cycle | 20 |
Maximum Turn-Off Time [msec] | 1/2 Cycle | 30 |
Description | Parameters |
Dielectric Strength, Input to Output (50/60Hz) | 4000 Vrms |
Dielectric Strength, Input/Output to Baseplate (50/60Hz) | 4000 Vrms |
Minimum Insulation Resistance (@ 500 VDC) | 109 Ohms |
Maximum Capacitance, Input/Output | 8 pF |
Ambient Operating Temperature Range | -40 to 80 °C |
Ambient Storage Temperature Range | -40 to 100 °C |
Short Circuit Current Rating | 100kA |
Weight (typical) | 2.3 oz (65 g) |
Housing Material | UL94 V-0 |
Baseplate Material | Aluminum |
Hardware Finish | Nickel Plating |
Input Terminal Screw Torque Range (lb-in/Nm) | 5/0.5 |
Load Terminal Screw Torque Range (lb-in/Nm) | 18-20 / 2-2.2 |
SSR Mounting Screw Torque Range (lb-in/Nm) | 20-25/2.2-2.8 |
Humidity | 95% non-condensing |
LED Input Status Indicator | Green |